Use the series object to provide your data values and to make local changes to a specific dataset. (Use the plot object to make global changes that apply to all datasets.)

Attribute	Type	Description
activeArea active-area	Boolean	Extends the activation area by allowing tooltips and API events to be triggered by the area under a line. Default Value: false Introduced in: v2.5.1 Chart types: Area,Radar
alpha	Number	Sets the opacity on the marker, with 0 being fully transparent and 1 being fully opaque. Note that decimal value requires the leading 0. Default Value: 1
alphaArea alpha-area	Number	Sets the transparency level of area in chart. Values must range between 0.0 and 1.0, with 0.0 being completely transparent and 1.0 being completely opaque. Note that values require the leading 0 before the decimal point. For scatter charts, applies to the polygon region (for `poly` aspect). For range charts, applies to area between two lines. For radar charts, applies to the area between the center of the radar chart and the line. For gauge charts, applies to the background under the gauge line. For area charts, applies to the area below the line. Refer to the Area Chart Tutorial for more information. Default Value: 0.5 Chart types: Area,Gauge,Radar,Range,Scatter
angle	Number	Sets the rotation angle of the object.
angleEnd angle-end	Number	Sets the end angle of a pie shape. Default Value: 360
angleSpace angle-space	Number	On `rose` aspect, it modifies the aperture of the pie section relative to the entire space of the scale interval. Default Value: null Chart types: Radar
angleStart angle-start	Number	Sets the beginning angle of a pie shape. Default Value: 0
animation	Object	Sets and customizes the animation used on chart load and reload.
aspect	String	Sets the aspect of the `series` data points in the chart. For heatmap charts, accepted values: ['brightness', 'size', 'vertical', 'horizontal', 'none']. For 3D vertical bar charts, accepted values: ['cylinder']. For stock charts, accepted values: ['candlestick', 'whisker']. For scatter charts, accepted values: ['segmented', 'spline', 'stepped', 'jumped']. For range charts, accepted values: ['segmented', 'spline']. For radar charts, accepted values: ['area', 'bar', 'column', 'dots', 'line', 'mixed', 'piano', 'rose', 'scatter']. For charts, accepted values: . For line charts, accepted values: ['segmented', 'spline', 'stepped', 'jumped']. For bullet charts, accepted values: ['bar', 'cone', 'histogram']. For 3D bar charts, accepted values: ['cylindar', 'pyramid']. For bar charts, accepted values: ['bar', 'cone', 'histogram']. For area charts, accepted values: ['segmented', 'spline', 'stepped']. Accepted Values: ['area', 'bar', 'brightness', 'candlestick', 'column', 'cone', 'cylindar', 'cylinder', 'dots', 'histogram', 'horizontal', 'jumped', 'line', 'mixed', 'none', 'piano', 'pyramid', 'rose', 'scatter', 'segmented', 'size', 'spline', 'stepped', 'vertical', 'violin', 'whisker'] Default Value: '' Introduced in: v2.8.8 Chart types: Area,Bar,3D Bar,Bullet,Heatmap-plugin,Line,Radar,Range,Scatter,Stock,Violin
backgroundClip background-clip	Boolean	Clips the background image to the margins of the shape/box. Default Value: true
backgroundColor background-color	String	Sets the background color of the object. Colors can be entered by name (e.g., "purple", "blue"), hexadecimal notation (e.g., "#666699", #33ccff"), or RGB notation (e.g., "rgb(255,0,0)", "rgb(0,0,255)") Default Value: null
backgroundColor1 background-color-1	String	Sets the first color of a 2 color background gradient of the object. To be used with background-color-2. Default Value: null
backgroundColor2 background-color-2	String	Sets the second color of a 2 color background gradient of the object. To be used with background-color-1. Default Value: null
backgroundFit background-fit	String	Sets the direction/s on which the background image is being "stretched". Default Value: ''
backgroundImage background-image	String	Sets a background image for the object. Value can be a local file or a web image's location. For patterns, the available patterns are: [`${string}`, 'PATTERN_BACKWARD_DIAGONAL', 'PATTERN_DARK_DOWNWARD_DIAGONAL', 'PATTERN_DARK_HORIZONTAL', 'PATTERN_DARK_UPWARD_DIAGONAL', 'PATTERN_DARK_VERTICAL', 'PATTERN_DASHED_DOWNWARD_DIAGONAL', 'PATTERN_DASHED_HORIZONTAL', 'PATTERN_DASHED_UPWARD_DIAGONAL', 'PATTERN_DASHED_VERTICAL', 'PATTERN_DIAGONAL_BRICK', 'PATTERN_DIAGONAL_CROSS', 'PATTERN_DIVOT', 'PATTERN_DOTTED_DIAMOND', 'PATTERN_DOTTED_GRID', 'PATTERN_FORWARD_DIAGONAL', 'PATTERN_HORIZONTAL', 'PATTERN_HORIZONTAL_BRICK', 'PATTERN_LARGE_CHECKER_BOARD', 'PATTERN_LARGE_GRID', 'PATTERN_LIGHT_DOWNWARD_DIAGONAL', 'PATTERN_LIGHT_HORIZONTAL', 'PATTERN_LIGHT_UPWARD_DIAGONAL', 'PATTERN_LIGHT_VERTICAL', 'PATTERN_NARROW_HORIZONTAL', 'PATTERN_NARROW_VERTICAL', 'PATTERN_OUTLINED_DIAMOND', 'PATTERN_PLAID', 'PATTERN_SHADE_25', 'PATTERN_SHADE_50', 'PATTERN_SHADE_75', 'PATTERN_SHINGLE', 'PATTERN_SMALL_CHECKER_BOARD', 'PATTERN_SMALL_GRID', 'PATTERN_SOLID_DIAMOND', 'PATTERN_SPHERE', 'PATTERN_TRELLIS', 'PATTERN_VERTICAL', 'PATTERN_WAVE', 'PATTERN_WEAVE', 'PATTERN_WIDE_DOWNWARD_DIAGONAL', 'PATTERN_WIDE_UPWARD_DIAGONAL', 'PATTERN_ZIGZAG']. Accepted Values: ['PATTERN_BACKWARD_DIAGONAL', 'PATTERN_DARK_DOWNWARD_DIAGONAL', 'PATTERN_DARK_HORIZONTAL', 'PATTERN_DARK_UPWARD_DIAGONAL', 'PATTERN_DARK_VERTICAL', 'PATTERN_DASHED_DOWNWARD_DIAGONAL', 'PATTERN_DASHED_HORIZONTAL', 'PATTERN_DASHED_UPWARD_DIAGONAL', 'PATTERN_DASHED_VERTICAL', 'PATTERN_DIAGONAL_BRICK', 'PATTERN_DIAGONAL_CROSS', 'PATTERN_DIVOT', 'PATTERN_DOTTED_DIAMOND', 'PATTERN_DOTTED_GRID', 'PATTERN_FORWARD_DIAGONAL', 'PATTERN_HORIZONTAL', 'PATTERN_HORIZONTAL_BRICK', 'PATTERN_LARGE_CHECKER_BOARD', 'PATTERN_LARGE_GRID', 'PATTERN_LIGHT_DOWNWARD_DIAGONAL', 'PATTERN_LIGHT_HORIZONTAL', 'PATTERN_LIGHT_UPWARD_DIAGONAL', 'PATTERN_LIGHT_VERTICAL', 'PATTERN_NARROW_HORIZONTAL', 'PATTERN_NARROW_VERTICAL', 'PATTERN_OUTLINED_DIAMOND', 'PATTERN_PLAID', 'PATTERN_SHADE_25', 'PATTERN_SHADE_50', 'PATTERN_SHADE_75', 'PATTERN_SHINGLE', 'PATTERN_SMALL_CHECKER_BOARD', 'PATTERN_SMALL_GRID', 'PATTERN_SOLID_DIAMOND', 'PATTERN_SPHERE', 'PATTERN_TRELLIS', 'PATTERN_VERTICAL', 'PATTERN_WAVE', 'PATTERN_WEAVE', 'PATTERN_WIDE_DOWNWARD_DIAGONAL', 'PATTERN_WIDE_UPWARD_DIAGONAL', 'PATTERN_ZIGZAG', `${string}`] Default Value: ''
backgroundMarker background-marker	Object	Allows you to set marker styling attributes for non-selected (or background) data points. This object may be used in conjunction with the "background-state" object, depending on the chart type. You can also style the selected data points using the "selected-state" and/or "selected-marker" object(s). Note: The "selection-mode" attribute must be included for styling to activate. You can also add a "background-mode" attribute to set whether non-selected data points activate per plot or graph. Default Value: null
backgroundMode background-mode	String	To be used with the "selection-mode" attribute. It allows you to set whether non-selected data points activate per plot (default) or graph. Note: Use this attribute with the "background-state" and/or "background-marker" object(s), which allow you specify the styling attributes you want applied. Accepted Values: ['plot', 'graph'] Default Value: 'plot'
backgroundPosition background-position	String	Sets the position of the background when the background-repeat value is no-repeat. Default Value: '50% 50%'
backgroundRepeat background-repeat	Boolean, String	Sets the repeating mode for the background image. Default Value: 'repeat'
backgroundScale background-scale	Number	Scales the background image using the specified ratio. Default Value: 1
backgroundState background-state	Object	Allows you to set styling attributes for non-selected (or background) data points. This object may be used in conjunction with the "background-marker" object, depending on the chart type. You can also style the selected data points using the "selected-state" and/or "selected-marker" object(s). Note: The "selection-mode" attribute must be included for styling to activate. You can also add a "background-mode" attribute to set whether non-selected data points activate per plot or graph. Default Value: null
bandSpace band-space	Number	Sets the spacing between pie layers Chart types: Nested-pie
bandWidths band-widths	Array.<Number>	Sets the width of each band Chart types: Nested-pie
barMaxWidth bar-max-width	Number	Sets the max width of bars. Default Value: -1 Chart types: Bar
barSpace bar-space	Number	Sets the amount of space between each bar in a single plot index. Default Value: 0.1 Chart types: Bar
barSpaceLeft bar-space-left	Number	Sets the left bar space. Chart types: Vertical Bar
barSpaceRight bar-space-right	Number	Sets the right bar space. Chart types: Vertical Bar
barWidth bar-width	Number	Sets the width of each bar. Default Value: 0 Chart types: Bar
barsOverlap bars-overlap	Number	Defines how much the bars in each plot index should overlap. Default Value: 0 Chart types: Bar
barsSpaceLeft bars-space-left	Number	Defines the spacing to the left of the bars at each index position. Default Value: 0.1 Chart types: Bar
barsSpaceRight bars-space-right	Number	Defines the spacing to the right of the bars at each index position. Default Value: 0.1 Chart types: Bar
border	Number	Sets the border width of the object. Can be a single value or a string of values, setting the values in the order "top right bottom left"
borderAlpha border-alpha	Number	Sets the transparency level of the border on the object. Values must range between 0.0 and 1.0, with 0.0 being completely transparent and 1.0 being completely opaque. Note that values require the leading 0 before the decimal point. Default Value: 1 Introduced in: v2.1.1
borderBottom border-bottom	Number	Sets the object's bottom border style. Accepts solid, dashed, and dotted styles. Default Value: ''
borderColor border-color	String	Sets the border color of the object. Default Value: '#000'
borderLeft border-left	Number	Sets the object's left border style. Accepts solid, dashed, and dotted styles.
borderRadius border-radius	Number	Sets the object's border radius for rounded corners. Larger values create rounder corners, while smaller values create sharper corners. A single value will affect all 4 corners; multiple values will have separate effects on each corner, with the first value affecting the top-left corner, the second value affecting the top-right corner, and so on, in a clockwise direction. A negative value will cut a corner off without rounding. Default Value: 0
borderRadiusBottomLeft border-radius-bottom-left	Number	Sets the object's bottom-left border radius for rounded corners. Larger values create rounder corners, while smaller values create sharper corners. A negative value will cut a corner off without rounding. Default Value: 0
borderRadiusBottomRight border-radius-bottom-right	Number	Sets the object's bottom-right border radius for rounded corners. Larger values create rounder corners, while smaller values create sharper corners. A negative value will cut a corner off without rounding. Default Value: 0
borderRadiusTopLeft border-radius-top-left	Number	Sets the object's top-left border radius for rounded corners. Larger values create rounder corners, while smaller values create sharper corners. A negative value will cut a corner off without rounding. Default Value: 0
borderRadiusTopRight border-radius-top-right	Number	Sets the object's top-right border radius for rounded corners. Larger values create rounder corners, while smaller values create sharper corners. A negative value will cut a corner off without rounding. Default Value: 0
borderRight border-right	Number	Sets the object's right border style. Accepts solid, dashed, and dotted styles. Default Value: ''
borderTop border-top	Number	Sets the object's top border style. Accepts solid, dashed, and dotted styles. Default Value: ''
borderWidth border-width	Number	Sets the border width of the object. Default Value: 0
bottomState bottom-state	Object	Sets the style for a copy of the object which is placed below the object itself.
children	Array.<Object>	Sets the children of the series data to define the hierarchy. Default Value: null Chart types: Flame,Treemap
class	String	Sets a class value on the object. Default Value: null
cls	String	Set to variables which can be targeted in chart JSON to style individual nodes. Chart types: Tree-module
clusterIndex cluster-index	Number	Sets the index of the cluster the plot will use. Default Value: -1 Chart types: Area,Bar,Bubble,Line,Scatter
clusterOffset cluster-offset	Number	Sets a margin for the scale step cluster. Default Value: 0 Chart types: Area,Bar,Bubble,Line,Scatter
clustered	Boolean	Sets if the entire plot will be painted within one step of the key scale. Default Value: false Introduced in: v2.8.2 Chart types: Area,Bar,Bubble,Line,Scatter
column	String	Sets how each column series data is grouped. Accepts a fraction in string format, where the numerator represents the group to place the column in and denomintor is the total number of groups (Ex. 1/2, 2/2, 2/2). Introduced in: v2.8.0 Chart types: Vertical Bar
connectNulls connect-nulls	Boolean	If true, connects the line over a null point rather than having a break in the chart. Default Value: false Introduced in: v2.6.1 Chart types: Area,Line
contourOnTop contour-on-top	Boolean	Sets whether the contour lines on area plots will be on top of all areas or will be hidden by the next area plot on top of it. You will notice when the attribute is set to true, the lines are all set above the shaded regions. Default Value: true Chart types: Area
csize	Number	Sets the size of the indicator by specifying the size of the center. This is a shortcut for `indicator`. Chart types: Gauge
dataAppendSelection data-append-selection	Boolean	To specify plot whether plot gets appended to selection. Otherwise, previous selection will be cleared instead of being appended on top. Default Value: false Introduced in: v2.9.1
dataBox data-box	Array.<Array.<Number>>	Accepts an array of number arrays of length five or six length. The number array of length five contains: calculated minimum, first quartile, median, third quartile, and maximum values of the dataset. The number array of length six contains: key, min, lower quartile, medium, upper quartile, and max. Chart types: Boxplot
dataClass data-class	Array.<String>	Sets an array of class names which will be applied on each column data cells. Chart types: Grid
dataDragging data-dragging	Boolean	Set to enable dragging the height of a bar. Chart types: Dragging Module
dataIgnoreSelection data-ignore-selection	Boolean	To specify plot to ignore in selection. Default Value: false Introduced in: v2.9.1
dataN data-n	Any	Prefix attribute or array using "data-" to define a custom token.
dataOutlier data-outlier	Array.<Array.<Number>>	Accepts an array of number arrays of length two. The number array contains: experiment number, and outlier values for an individual outlying point. Chart types: Boxplot
dataPie data-pie	String	Sets the pie slice text. Default Value: null Chart types: Bubble-pie
dataV data-v	Array.<Number>	Data array for each pie slice. Default Value: null Chart types: Bubble-pie
decimals	Number	Sets the number of decimal places displayed for each value.
decimalsSeparator decimals-separator	String	Sets the separator to be used in place of the default decimal point. Any string or character can be used to replace the decimal. Default Value: null
density	Number	Sets a factor which will affect the data sampling. Values larger than 1 will increase the sampling step, values smaller than 1 will decrease the sampling step. Default Value: 1
detach	Boolean	Specifies whether or not the slice detaches from the pie when clicked on. Default Value: true Chart types: Pie
detached	Boolean	Specifies whether or not the slice detach pie slices on load. Default Value: false Chart types: Pie
dragging	Object	Sets options for the dragging module. Chart types: Dragging Module
entry	Array.<Object>, Object	Modifies the entry arrows, which appear on the left side of the funnel. Chart types: Funnel
error	Object	Error Bars Only: To set the styling of the error bars. (Error bar values are set with the "errors" array. Default Value: null
errors	Array.<Array.<Number>>	Error Bars Only: An array of items specifying the value of error bars for items in the plot. Error can be specified using a specific max error and min error respectively, or both at once. Note errors can be set for all plot indexes within the "plot": {} object or they can be set within each series value set. Default Value: []
exact	Boolean	By default, ZingChart uses sampling when rendering charts. This helps improve rendering speeds and typically does not affect the appearance of the chart. However, using the attribute "exact": true within the "plot": { } object forces ZingChart to render all nodes. Default Value: false
exit	Array.<Object>, Object	Modifies the exit arrows, which appear on the right side of the funnel. Chart types: Funnel
exponent	Boolean	Sets whether the scale values will be displayed in scientific notation. Particularly useful when dealing with large numbers. Default Value: false
exponentDecimals exponent-decimals	Number	Sets the number of decimals that will be displayed when using scientific notation. Use with the 'exponent' attribute. Default Value: 2
extraValues extra-values	Array.<Number>	Sets additional values that will be attached to the plot. Default Value: 0
facets	Object	3D objects are made up of front, left, right, top, and bottom sections. As such, these terms are used within the "facets" object to style each section. Introduced in: v1.15.0 Chart types: 3D Charts
fake	Boolean	Set to refer to node as a branch point for other nodes to branch off from. Chart types: Tree-module
fillAngle fill-angle	Number	Sets the angle of the axis along which the linear gradient is drawn. Default Value: 90
fillOffsetX fill-offset-x	Number	Sets an X offset to apply to the fill. Default Value: 0
fillOffsetY fill-offset-y	Number	Sets a Y offset to apply to the fill. Default Value: 0
fillType fill-type	String	Sets the background gradient fill type to either linear or radial. Accepted Values: ['linear', 'none', 'radial'] Default Value: 'linear'
flat	Boolean	Set to true disables the chart interactivity. Default Value: false
goal	Object	To set the styling of the goals in bullet charts. Refer to the Bullet Charts Tutorial for more information. Chart types: Bullet
goals	Array.<Number>	Accepts numerical values. Determines where goals are set for all plots. The "goals": [ ] values can also be set individually within each value set. Chart types: Bullet
gradientColors gradient-colors	String	Sets a set of colors for a complex background gradient consisting of 2 or more colors. To be used with gradient-stops. Default Value: ''
gradientStops gradient-stops	String	Sets the gradient stops for a complex background gradient consisting of 2 or more colors. To be used with gradient-colors. Default Value: ''
group	Number, String	Specifies the group the object is placed in. Default Value: '' Introduced in: v2.8.3 Chart types: Bubble-pack,Chord,Tree-module
groupBars group-bars	Boolean	If false, will force bars to fully overlap. Default Value: true Chart types: Bar
groupSelections group-selections	Boolean	When true, automatically selects all nodes with the same scale index as the selected node. The selection-mode attribute must also be set. Default Value: false
guideLabel guide-label	Object	To use with crosshair plot labels. When you have multiple series in your chart, you may want to separate the crosshair plot labels so that a label appears for each series. To do this, you must add a multiple attribute in the plot-label object in crosshair-x, and set the value to true. You can then createguide-label objects in individual series objects to specify how the text and styling for individual plot labels appear.
guideMarker guide-marker	Object	Sets the styling for guide markers. Default Value: false
highlight	Boolean	When set to true, it highlights the corresponding series when the user hovers over it in the legend. Note: This attribute may be used in conjunction with the "highlight-state" and/or "highlight-marker" object(s), which allow for custom styling. Default Value: false
highlightLegend highlight-legend	Boolean	Sets whether the legend entry for the plot will be highlighted when hovering the plot. Default Value: false
highlightMarker highlight-marker	Object	Sets the styling for marker when associated legend item is highlighted. Introduced in: v1.0.1
highlightState highlight-state	Object	Sets the styling for when a legend item is highlighted. Introduced in: v1.0.1
hintTs hint-ts	Boolean	Set to `true` if using timestamps as keys to activate a small optimization.
hoverMarker hover-marker	Object	Allows you to set styling attributes, which are triggered when the user hovers over the data points (or nodes) on the chart. This object may be used in conjunction with the "hover-state" object, depending on the chart type. Note: The "hover-mode" attribute may be used to set whether hover styling activates per node or plot. Default Value: null
hoverMode hover-mode	String	To specify whether data points that are hovered over activate per node (default) or plot. Note: Use this attribute with the "hover-state" and/or "hover-marker" object(s), which allow you specify the styling attributes you want applied. Accepted Values: ['node', 'plot'] Default Value: 'node'
id	String	Sets the id of the object. Default Value: ''
indicator	Array.<Number>	Your gauge chart's needle (sometimes referred to as a dial) indicates where your data value falls on your scale. You can modify the shape of your gauge needle with the indicator attribute. This allows you to display a curved or flat base, rounded or pointed tip, and/or needle that is offset from the gauge's center. Provide your indicator values in an array in the following format: indicator: [R-Base, R-Tip, A-Base, A-Tip, Offset]. See the Gauge tutorial for more information. Chart types: Gauge
join	Array.<Number>	The value of the joined area between the venn sets (the current and the next one). Chart types: Venn-diagram
jsRule js-rule	String	Set a window.functionName to call dynamically. Example: `jsRule: "window.functionName()"`. Default Value: null
keyWidth key-width	Boolean	If true, the value of `barWidth` will be the size of the key scale (X scale). Default Value: true Chart types: Bar
legendItem legend-item	Object	Sets the styling for the active legend items.
legendMarker legend-marker	Object	Sets the styling for the legend markers.
legendText legend-text	String	Sets a text which will appear in the legend instead of the plot's text attribute. Default Value: null
lineColor line-color	String	Sets the line color of the object, applicable on non-closed shapes. See also border-color for closed shapes. Default Value: '#000'
lineGapSize line-gap-size	Number	Can be used to create custom dashed or dotted lines when used with line-segment-size. This will control the size of the gaps between each line segment. Default Value: 0
lineSegmentSize line-segment-size	Number	Can be used to create custom dashed or dotted lines when used with line-gap-size. This will control the size of the visible segment of line. Default Value: 0
lineStyle line-style	String	Sets the line style of the object. Accepted Values: ['dashdot', 'dashed', 'dotted', 'solid'] Default Value: ''
lineWidth line-width	Number	Sets the line width of the object, applicable on non-closed shapes. See also border-width for closed shapes. Default Value: 0 Chart types: Line
marker	Object	Sets the styling for markers. Default Value: null
maxLine max-line	Object	In the range chart, configures the style of the line representing max values. Chart types: Range
maxMarker max-marker	Object	Sets the styling for upper node markers. Default Value: null Chart types: Range
maxNodes max-nodes	Number	Applies to charts, such as line and area, which have markers. When there are too many markers for the chart, ZingChart does not display all markers. Example 1000 nodes on a 300px wide chart. Setting max-nodes will override the default setting and force nodes to be displayed. Default Value: null
maxRatio max-ratio	Number	Sets the maximum aspect that the heat map operates in. Must be a value between 0 and 1. Chart types: Heat-map
maxSize max-size	Number	Sets a maximum bubble size Default Value: null Chart types: Bubble
maxTrackers max-trackers	Number	Sets the maximum numbers of nodes for which a tracking area will be created. This is best used to optimize charts with large sets of data. Default Value: null
mediaRules media-rules	Array.<Object>	Configure media rules.
midPoint mid-point	Boolean	Sets whether or not a node is wrapped equally before and after its position. If set to false, the tooltip for the node is triggered only after the node. Default Value: true Chart types: Area,Line
minExit min-exit	Number	Sets the minimum width of the funnel exit by either providing a pixel or percentage value. The pixel value corresponds to the width of the funnel base. The percentage or decimal value between 0 to 1 is the size in relation to the funnel plot area. Default Value: 0 Introduced in: v1.3.0 Chart types: Funnel
minLine min-line	Object	In the range chart, configures the style of the line representing min values. Chart types: Range
minMarker min-marker	Object	Sets the styling for lower node markers. Default Value: null Chart types: Range
minRatio min-ratio	Number	Sets the minimum aspect that the heat map operates in. Must be a value between 0 and 1. Chart types: Heat-map
minSize min-size	Number	Sets a minimum bubble size Default Value: null Chart types: Bubble
mode	String	Sets the plot's painting mode. Normal mode paints node by node, allowing for rules, fast mode is faster but lacks rule feature. Accepted Values: ['normal', 'fast'] Default Value: null
monotone	Boolean	Sets whether monotone interpolation is used for charts using the "spline" aspect. Default Value: false
multiplier	Boolean	Enables abbreviating large numbers with short units, such as K, M, B, etc.. Default Value: null
name	String	Name of the bubble. Default Value: '' Introduced in: v2.8.3 Chart types: Bubble-pack
negation	String	This attribute will determine how negative values are handled. When using "format":"$%v" setting "negation":"currency" will move the - symbol to the outside of the $ sign. When using "negation" within the "plot": { } object you will see changes in things such as tooltips or anywhere else series data is used to populate values. You need to set "negation" in things such as "scale-y": { } separately. Accepted Values: ['standard', 'currency'] Default Value: 'standard'
offset	Number	Sets an offset at the start and end of the plotted data. This will cause the data to appear as if it were 'squeezed'. Chart types: Pie
offsetR offset-r	Number	Sets an R offset to apply when positioning the object. Default Value: 0 Chart types: Pie
offsetValues offset-values	Array.<Number>	Sets the starting point of each bar on a floating chart. Default Value: [] Chart types: Bar
palette	Array.<String>, Number	Defines a custom color palette to apply to chart. Set to number representing the index of the palette to apply (Number). Set to array of string to define colors in the palette (Array.). Default Value: -1
parent	String	Specifies the parent node. Default Value: '' Introduced in: v2.8.3 Chart types: Bubble-pack,Tree-module
pieTransform pie-transform	String	Transforms the shape of pie slices. Accepted Values: ['none', 'bite', `bite=${number}${'%'\|''}`, 'callout', `callout=${number}${'%'\|''}`, 'droplet', 'flat', 'flow', `flow=${number}${'%'\|''}`, 'fold', `fold=${number}${'%'\|''}`] Default Value: 'none' Chart types: Pie
preview	Boolean, Object	Preview charts are a miniaturized version of the main chart, allowing users to zoom in and examine sections of a chart while still viewing it in its entirety. Accepts a boolean value to set whether the series data appears in the preview (Boolean). Default Value: true
previewState preview-state	Object	Styles series elements displayed in preview. Introduced in: v2.6.1 Chart types: Area,Bar,Line
rank	Number	Set to a number between 1 - N to represent the overall rank of the item. Chart types: Rankflow
ranks	Array.<Number>	Set to a number between 1 - N to represent the ranks of the item across each category. Chart types: Rankflow
rectShortcut rect-shortcut	Boolean	Used to force the library to create rectangles using a faster drawing API (instead of painting them like a closed polygon). However, using this would disable effects like rounded borders. It is a performance setting for edge cases. Default Value: false
reference	String	Sets the relationship between nodes. For tree-module charts, set to id of parent node to place under. Should also set the `parent` attribute to name of parent node. Places node under a sibling node instead of directly under parent node [`${string}`]. For heatmap chats, sets the relationship for setting the heat map values. Refer to the Heat Map tutorial for more information ['plot-max', 'plot-total', 'chart-max', 'chart-total']. Accepted Values: ['chart-max', 'chart-total', 'plot-max', 'plot-total', `${string}`] Chart types: Heat-map,Tree-module
rel	String	Set to id of series data to set as relative plot. Default Value: null
rules	Array.<Object>	Applies different sets of attributes to parts of the chart that meet the prerequisites listed.
scales	String	Specifies the scales in a comma-separated string used by the plot item. Example: 'scale-x,scale-y' or 'scale-x, scale-y-2'. Default Value: []
scaling	String	Sets whether the area or radius of the bubble should reflect the bubble value Accepted Values: ['area', 'radius'] Default Value: 'area' Chart types: Bubble
scrollStepMultiplier scroll-step-multiplier	Number	Sets the multiplier to apply to step when scrolling chart. Requires scrolling to be enabled. Default Value: 1
segmentTrackers segment-trackers	Boolean	Allows you to specify whether tooltips are activated by the markers and lines (default) or the markers only. Default Value: true Chart types: Area,Line
selectedMarker selected-marker	Object	Allows you to set marker styling attributes, which are triggered when the user clicks on or selects data points on your chart. This object may be used in conjunction with the 'selected-state' object, depending on the chart type. You can also style the unselected (or background) data points using the 'background-state' and/or 'background-marker' object(s). Default Value: null
selectedState selected-state	Object	Sets the styling for the plot's selected state. Default Value: null
selectionMode selection-mode	String	To set how data points are selected on a chart. 'none' (default) prevents any selection. 'plot' allows you to select one node (or data point) per series (or dataset). 'graph' allows you to select one node per chart. 'multiple' allows you to select as many nodes as you want. Note: Use this attribute with the selected-state and/or selected-marker object(s), which allow you specify the styling attributes you want applied. Accepted Values: ['none', 'plot', 'graph', 'multiple'] Default Value: 'none'
shadow	Boolean	Sets whether the object's shadow is visible or not. Has limited effect on HTML5 implementation. Default Value: false
shadowAlpha shadow-alpha	Number	Sets the transparency of the shadow of the object. The higher the value, the less transparent the shadow will be. Default Value: 0.75
shadowAngle shadow-angle	Number	Sets the angle of the shadow underneath the object. Default Value: 45
shadowBlur shadow-blur	Number	Sets the blur effect size for the shadow of the object. Has limited effect on HTML5 implementation. Default Value: 0
shadowColor shadow-color	String	Sets the color of the shadow of the object. Default Value: '#999'
shadowDistance shadow-distance	Number	Sets the distance between the shadow and the object. Default Value: 2
share	Array.<Number>	The value of the shared area between all venn sets. Chart types: Venn-diagram
short	Boolean	Automatically shortens large units (e.g. 1000000 -> 1M). Default Value: false Introduced in: v2.3.1
shortUnit short-unit	String	Specifies which unit of measure to use when `short` is set to true. Accepted Values: ['k', 'K', 'm', 'M', 'b', 'B'] Default Value: '' Introduced in: v2.3.1
showZero show-zero	Boolean	Renders zero values within series as 1px to visibly show zero values. Default Value: false Chart types: Bar,Pie
sibling	String	Set to id of another node to link the nodes together. Chart types: Tree-module
size	Number	Sets the size of the object. Default Value: 0 Chart types: Pie
sizeFactor size-factor	Number	Sets the size factor to apply to the chart. Default Value: 1 Chart types: Bubble
sizingGroup sizing-group	Number	Sets a group for the bubble plot. The sizing of the bubbles belonging to different groups is independent. If bubble legend is enabled, one is created for each sizing group. Default Value: 1 Chart types: Bubble
slice	Number	Sets the radius of the ring in chart. Accepts percentage or pixel value. For donut charts the default value is 35%. Default Value: 0 Chart types: Pie
sliceStart slice-start	Number	Sets the size of the center hole for a donut chart Chart types: Nested-pie
source	String	Id of the source node to create a link or connection between two nodes Default Value: null Introduced in: v2.8.4 Chart types: Tree-module
spaceEntry space-entry	Number	Modifies the width of the space before funnel sections Accepted Values: A percentage or decimal between 0 and 1, Default Value: 0.1 Chart types: Funnel
spaceExit space-exit	Number	Modifies the width of the space after funnel secions Accepted Values: A percentage or decimal between 0 and 1, Default Value: 0.1 Chart types: Funnel
stack	Number	Using the 'stack': attribute allows you to assign which stack you want each value set associated with when using a multiple stacked chart. Default Value: 0 Chart types: Area,Bar,Line,Radar
stackType stack-type	String	Sets the stacking logic for stacked charts. Accepted Values: ['normal', '100%'] Default Value: 'normal' Chart types: Area,Bar,Line,Radar
stacked	Boolean	Setting 'stacked': true will take each of the 'series' value sets and stack them on top of one another Default Value: false
startWidth start-width	String	Sets how the starting width of the funnel is set, dynamically (based on the starting value) or statically (always the same width) Accepted Values: ['dynamic', 'static'] Default Value: 'dynamic' Introduced in: v1.3.0 Chart types: Funnel
stepStart step-start	String	When `aspect` is set to "stepped", sets the location of the stepping relative to two consecutive nodes. Accepted Values: ['after', 'before', 'middle'] Default Value: 'middle' Introduced in: v1.8.0 Chart types: Area,Line
style	Object	Sets styling options for the chart. Chart types: Chord,Rankflow
styles	Array.<Object,String>	The "styles" array allows you to style charts by node, or individual data point. The feature can be used to differentiate each node on a single series chart. You may also want to style charts by node index rather than series on a multi-series chart. Default Value: [] Chart types: Bar
target	String	Sets the target of the object. For tree charts, set to the id of the target node to create a link or connection between two node [`${string}`]. For shapes, sets the target for the URL to either open URL or use the content fetched from URL (e.g. "window=NAME", "graph=ID") ['_blank', '_top', '_parent', `_window=${string}`, 'graph', `graph=${string}`]. Accepted Values: ['_blank', '_parent', '_top', 'graph', `${string}`, `_window=${string}`, `graph=${string}`] Default Value: null Introduced in: v2.8.4 Chart types: Tree-module
text	String	Sets the text content of the object. Default Value: null
textAlign text-align	String	Sets the alignment of the object. Accepted Values: ['center', 'bottom', 'left', 'middle', 'right'] Default Value: 'center'
thickness	Number	Sets the thickness of the chart Default Value: -1 Chart types: 3D Pie,3D Donut
thousandsSeparator thousands-separator	String	Sets the character used to separate thousands. Default Value: null
tooltip	Object	Configures the tooltip element, which appears when hovering over an object. Default Value: []
tooltipText tooltip-text	String	Sets the tooltip text. Default Value: null
topState top-state	Object	Sets the style for a copy of the object which is placed above the object itself.
totals	Array.<Number>	Sets the total value of the pie chart. Default Value: null Chart types: Pie
trendDown trend-down	Object	Styles day with stock losses Chart types: Stock
trendEqual trend-equal	Object	Styles day with no stock gain or loss Chart types: Stock
trendUp trend-up	Object	Styles days with stock gains Chart types: Stock
type	String	Sets the type of the object. For mixedcharts, accepted values: ['area', 'area3d', 'bar', 'bar3d', 'boxplot', 'bubble', 'bubble-pack', 'bubble-pie', 'bullet', 'calendar', 'chord', 'depth', 'flame', 'funnel', 'gauge', 'grid', 'hbar', 'hbar3d', 'hboxplot', 'hbubble', 'hbullet', 'heatmap', 'hfunnel', 'hmixed', 'hscatter', 'hwaterfall', 'hwaterfall3d', 'line', 'line3d', 'mixed', 'mixed3d', 'navpie', 'nestedpie', 'null', 'pareto', 'piano', 'pie', 'pie3d', 'pop-pyramid', 'radar', 'rankflow', 'range', 'ring', 'ring3d', 'scatter', 'scorecard', 'stock', 'stream', 'sunburst', 'tilemap', 'tree', 'treemap', 'varea', 'variwide', 'vbar', 'vbar3d', 'vbullet', 'vectorplot', 'venn', 'vfunnel', 'vline', 'vrange', 'vstream', 'waterfall', 'waterfall3d', 'wordcloud', 'zingchart.maps']. For tree charts, set to 'node' to represent each series data as a floating node or 'link' to draw a link from the `source` to `target` value ['link', 'node']. Accepted Values: ['area', 'area3d', 'bar', 'bar3d', 'boxplot', 'bubble', 'bubble-pack', 'bubble-pie', 'bullet', 'calendar', 'chord', 'depth', 'flame', 'funnel', 'gauge', 'grid', 'hbar', 'hbar3d', 'hboxplot', 'hbubble', 'hbullet', 'heatmap', 'hfunnel', 'hmixed', 'hscatter', 'hwaterfall', 'hwaterfall3d', 'line', 'line3d', 'link', 'mixed', 'mixed3d', 'navpie', 'nestedpie', 'node', 'null', 'pareto', 'piano', 'pie', 'pie3d', 'pop-pyramid', 'radar', 'range', 'rankflow', 'ring', 'ring3d', 'scatter', 'scorecard', 'stock', 'stream', 'sunburst', 'tilemap', 'tree', 'treemap', 'varea', 'variwide', 'vbar', 'vbar3d', 'vbullet', 'vectorplot', 'venn', 'vfunnel', 'vline', 'vrange', 'vstream', 'waterfall', 'waterfall3d', 'wordcloud', 'zingchart.maps'] Default Value: '' Chart types: Tree-module
url	String	Sets an URL associated with this object. Used mostly on nodes/labels/shapes with their associated click events. Default Value: null
value	Number	The numeric value of the bubble object being added. Default Value: '' Introduced in: v2.8.3 Chart types: Bubble-pack
valueBox value-box	Array.<Object>, Object	Value boxes are the labels that appear next to or over data points (or nodes) on your chart. Use this object to modify how they appear and what values, tokens, and/or text to display. Default Value: null
values	Array.<any>	Data to display in chart.
visible	Boolean	Sets the visibility of the object. Allows you to turn off the object without removing lines of JSON. Default Value: true
x	Number	Sets the X position of the object.
y	Number	Sets the Y position of the object.
zEnd z-end	Number	Sets the z-axis end point on 3D charts. Accepted Values: ['_blank', '_top', '_parent', '_window=NAME', 'graph=ID'] Default Value: null Chart types: 3D Charts
zIndex z-index	Number	Sets the z position of the object. Objects with higher z indexes will appear "above" those with lower z index values. Default Value: 0
zSort z-sort	Number	Used to force the sorting of the active areas (which trigger the tooltip) of two shapes in case they overlap. Default Value: 1
zStart z-start	Number	Sets the z-axis start point on 3D charts. Introduced in: v1.0.1 Chart types: 3D Charts